DROP KITS

Belltech’s lowering and lifting Struts

On the new trucks that are running the McPherson type front struts:

• 04+ Ford F150
• 07+ Chevy/GMC Silverado/Sierra
• 07+ Chevy/GMC Tahoe, Yukon, Yukon XL, Suburban & Avalanche
• 04-06 Chevy/GMC Colorado/Canyon
• 02-07 Trailblazer/Envoy
• 04+ Nissan Titan
• 07+ Toyota Tundra

Belltech has developed the solution to correct many of the problems in the front ends of these vehicles, including the lackluster handling and performance of the factory McPherson Struts, utilizing the next generation valving technology of our new Street Performance Shock line.

In true Belltech style, the Street Performance Lift and Lowering Struts not only provide the performance & safety that you can only get from Belltech, but allow you to adjust the ride height of the front end by up to a 2” Lift to level out the factory front to rear rake, as well as all the way down to a 3” lowering in half inch increments with the same part! (Depending on application)

Lowering
The Lift / Lower Strut enables you to lower your vehicle -2” in ½” increments (-3” for select applications), combine this with a shackle kit to provide you a lowered and level appearance. Or match it with a flip kit for that more aggressive lowered stance.

Lowering Springs
As the Street Performance Lift and Lowering Struts lower in ½ inch increments up to a maximum of 2-3 inches (depending on the application) you can lower the trucks front end using the factory springs!

You can still use a lowering spring with these shocks, you just need to select the factory level height when you are installing to ensure proper shock travel for ride quality.

PLEASE REMEMBER!!!
As the other suspension manufactures on the market DO NOT currently offer any shock solution for these trucks, the Street Performance Lift and Lowering Struts are compatible with every other manufactures kits, and are a welcome addition to the driver, providing the control these trucks need!

Belltech Lowering Block Kits

On Mini Trucks with the rear axle on top of the leaf spring, Belltech Lowering Blocks provide an inexpensive, easy to install way to lower your Mini Truck by increasing the distance between the leaf spring and the axle, effectively lowering the vehicle.

Belltech lowering block kits are manufactured of high quality extruded aluminum and come complete with blocks, u-bolts, Nyloc nuts and washers.
The extruded aluminum process yields higher strength ratings when compared to cast or steel lowering blocks (or other methods of manufacturing). Lowering blocks are designed to lower the rear of your vehicle in 1,2 or 3 inch increments.

Also available with built in 2 degree taper for drive line angle correction.

2009 F150 Drop

Ground Force Popular Kits

2007 Silverado Drop

Part 9860

Recently released is kit 9860 fitting the 07-09 GM C1500 Silverado/Sierra/Denali (New Body)Crew Cab/Ext Cab Short bed 2WD (Kit includes front spindles,front coils,rear flip kit,rear shocks,wedges,bump stops)

Part 9996

Now available, kit 9996, fitting the 07-09 GM C1500 Silverado/Sierra/Denali (New Body)Crew Cab Short bed 2WD (Kit includes front spindles, front coils, rear leafs, rear shocks, wedges, bump stops)

(NOT RECOMMENDED FOR HAULING OR TOWING)

Part 9857

07-09 GM C1500 Silverado/Sierra/Denali (New Body) Crew Cab/Ext Cab Short bed 2WD/4WD/AWD (Kit includes front spindles, rear leafs, rear shocks, wedges, bump stops)

Stop on by as we carry many more drop kits from Belltech and Ground Force for your make/model truck!