Their systems are built for horsepower. In fact on the 2003 Ford Mustang SVT® we get an impressive 30 horsepower.They establish a stock baseline horsepower with their in house dynamometers and then design the air intakes to get the largest horsepower gain attainable without causing a “Check Engine Light” to come on. The horsepower numbers are not based on the single biggest gain from one particular vehicle but are an average of runs and vehicles. They're studies are backed up by well documented tests.

Even a K&N replacement air filter is limited by the size of the original air box but once it is removed, there is plenty of room to work with. Now they can apply High-Flow Technology to a large conical open element air filter, providing more surface area for huge increases in airflow that turn into horsepower you can feel. The oversize air filter also captures and holds more dirt.  This increases the service life before a cleaning is required (up to 100,000 miles for air intakes depending on driving conditions).

Many K&N Intake Systems are street legal in all 50 states and include a California Air Resource Board (CARB) Executive Order (EO) number that ensures the kit has been tested to comply with emissions standards. EO numbers apply to the kit as well as the year, make and model it is being installed on. Systems with no EO number are street legal in most states but may not be used on emissions controlled vehicles in the state of California or other states adopting California emission standards. 

THE WORLD’S FIRST MILLION-MILE LIMITED WARRANTY

K&N invented the world’s first air filter guaranteed for one million miles. That same warranty applies to their High-Flow Air Intake Systems. Well engineered, built with the finest materials.

Call to see prices and availablity for your truck!

VOLANT INTAKE

Volant Air Filter Box: Our Cross-Link polyethylene box is engineered to each specific application for low restriction and an increase in air volume. It insulates and protects the filter from engine heat, moisture, dust and debris to provide colder air to the engine for an increase in horsepower.

Volant Air Duct: Factory air inlet ducts use sound baffles and awkward bends which restrict flow. Our Cross-Link polyethylene air ducts are sculptured to give the engine less restrictive breathing. Incorporating larger diameters and unique bends, that can't be duplicated with metal ducts, allow for maximum airflow velocity and throttle response.

Volant Pro 5 Filter: Many of our intakes come with this cleanable and reusable high grade cotton filter media with five-layers of protection. It reduces air restriction and increases engine output by using precision pleat geometry, that optimizes airflow throughout the intake system. We recommend using Volant cleaning and oiling system for servicing the Pro 5 Filter.

NEW PowerCore® Filter: The PowerCore® air filter is the most revolutionary on the market. Manufactured by Donaldson® to Volant's specifications, the PowerCore® uses advanced Ultra-Web® NanoFiber® technology. This material is a high-quality synthetic, that won't deteriorate as easily as traditional paper element and cotton/gauze filter media, while also providing vastly improved filtration up to 99.99%. In addition, it's water resistant and never needs oiling. The PowerCore® works by directing air into the front of the filter, where it is channeled into its fluted design. The channels are alternately sealed, allowing air to enter through an open flute and forcing it to exit out an adjacent flute. This allows the air to be filtered in one pass through the Ultra-Web® NanoFiber® media with less restriction, allowing clean air to enter your engine for increased airflow and higher filtration efficiency. This technology allows the PowerCore® air filter to include a 4 year or 100,000 miles warranty when used in urban conditions.

Volant offers Polished Aluminum or Carbon Fiber Look lids. (Some of our older applications and low production intake kits have the carbon fiber look lid.)

Polished Aluminum Lid: Available on all Volant's popular intake systems, this embossed and polished lid features a high-grade neoprene foam backing for good sound insulation that enhances your engine compartment.

Carbon Fiber Lid: Made from ABS plastic with a carbon fiber appearance for a custom look. This lid is included on older applications and low production air intake kits.

High Performance Silicon Connectors: Our silicone hose connectors provide flexibility while maintaining strength and thermal stability. They won't crack or deform over time like rubber connectors.

Stainless Steel Clamps: We only use marine-grade, stainless steel clamps that provide optimal performance to provide a solid seal that won't loosen or deteriorate.

Call to see price and availability for your truck!